1. When the alarm is running, the panel displays E1 (meaning the concentration is not insufficient).Way of troubleshooting: (a) The alarm time is set too short, so there isn’t enough time to add detergent and make it reach the required concentration. Reset the alarm time.(b) Check whether the detergent in the feeding bucket has been used up or not; if yes, a new bucket shall be replaced.(c) Check whether the suction part of detergent pump pipe is under the liquid level of the bucket or not.(d) Check whether the probe is clean or not and the wiring is connected well or not.(e) Check whether the...
Release time:
2016
-
07
-
13
Browsing times：14
背面液晶显示板：Back LCD Display PanelCPU芯片：CPU chip
Release time:
2016
-
07
-
13
Browsing times：21
DT01 Motherboard CPU芯片：CPU chip Packing List of DT01 & DT03 DispensersNo. Name Unit Quantity-------------------------------------------------------------------------------DT02 Liquid Dispenser Set 1FJ404C Delivery Pipe Meter 10FJ406 Check Valve Piece 1FJ408 Probe (Optional) Piece 1FJ407 Injector Piece 1FJ410 PVC Suction Pipe Piece 2FJ401F Screw Piece 2
Release time:
2016
-
07
-
13
Browsing times：22
Dryer Motherboard 速度：Speed延迟时：Delay Time工作时间：Working Time小：Min大：Max
Release time:
2016
-
07
-
13
Browsing times：19
探头接线端子：Probe Wiring Terminal变压器输入：Input of Transformer马达输入：Input of Motor浓度调节：Adjustment of Concentration左关右开：Left On and Right OffWork工作时间：Working Time小：Min大：Max转换开关：Shifting Switch时间模式：Time Mode探头模式：Probe Mode备用：BackupDT02 Liquid Dispenser Set 1FJ404C Delivery Pipe Meter 10FJ406 Check Valve Piece 1FJ408 Probe (Optional) Piece 1FJ047 Injector Piece 1FJ410 PVC Suction Pipe Piece 2FJ401F Screw Piece 2
Release time:
2016
-
07
-
13
Browsing times：20