Service Centre Service
Setup and Debugging
Data: 2016-07-13
Browsing times: 26

Press ENTER key for a while\ display “enter password” (500) (The initial password of DT01 is 50, and that of DT03 is 500)

Then press ENTER key again \ display mode: time mode (P0) and probe mode (P1)

Select the mode you need and press ENTER key to enter (the probe mode shall be operated when the probe is installed and connected inside the dishwasher)

 

Probe Mode (P1)

No.

Function

Value Scope

Remarks

A1

Running Speed of Washing Pump

30-100

PROBE terminal on the motherboard shall be connected when this function is selected

A2

Concentration of Agents

0-100

DET terminal on the motherboard shall be connected for operation

A3

Alarm Waiting Time

0-100

The alarm will start running when the concentration of A2 is not reached within the time of A3

A4

Alarm Switch Time

0-100

After the alarm is running for the time of A4, it will automatically switch into the operation in the mode of fixed time. When A4 is set as 0, this function will not be available.

B1

Running Speed of Drying Pump

0-100


B2

Drying Delay Time

0-100

RINSE terminal on the motherboard shall be connected for operation

B3

Working Time of Drying Pump

0-100

 

Fixed Time Mode (P0)

No.

Function

Value Scope

Remarks

C1

Running Speed of Washing Pump

30-100


C2

Delay Time of Washing Pump for Liquid Filling Preparation

0-100

DET terminal on the motherboard shall be connected for operation, and the liquid filling may be recycled.

C3

Running Time of Washing Pump for Liquid Filling Preparation

0-100

C4

Delay Time of Washing Pump for Liquid Filling Every Time

0-100

RINSE terminal on the motherboard shall be connected for operation, and the liquid filling may be recycled.

C5

Running Time of Washing Pump for Liquid Filling Every Time

0-100

B1

Running Speed of Drying Pump

0-100


B2

Delay Time of Drying Pump for Liquid Filling Every Time

0-100

RINSE terminal on the motherboard shall be connected for operation, and it is recyclable.

B3

Running Time of Drying Pump for Liquid Filling Every Time

0-100

 

When the delay time is 0, it will only run for the time set for running as the power is on (no matter how long the power is on).

When both the delay time and running time are 0, the corresponding working pump will continue running as its power is on and will stop running as its power is off.

When both the delay time and running time are not 0, it will run for the delay time and then the running time as the power is on.


012-6184 8386
    WeChat sales
     MagicView
Copyright ©2016-SHANGHAI QIANHE HOTEL EQUIPMENT CO., LTD
犀牛云提供企业云服务
X
3

SKYPE 设置

4

阿里旺旺设置

5

电话号码管理

  • 4006-971-972
6

二维码管理

Open