Press ENTER key for a while\ display “enter password” (500) (The initial password of DT01 is 50, and that of DT03 is 500)
Then press ENTER key again \ display mode: time mode (P0) and probe mode (P1)
Select the mode you need and press ENTER key to enter (the probe mode shall be operated when the probe is installed and connected inside the dishwasher)
Probe Mode (P1)
No. | Function | Value Scope | Remarks |
A1 | Running Speed of Washing Pump | 30-100 | PROBE terminal on the motherboard shall be connected when this function is selected |
A2 | Concentration of Agents | 0-100 | DET terminal on the motherboard shall be connected for operation |
A3 | Alarm Waiting Time | 0-100 | The alarm will start running when the concentration of A2 is not reached within the time of A3 |
A4 | Alarm Switch Time | 0-100 | After the alarm is running for the time of A4, it will automatically switch into the operation in the mode of fixed time. When A4 is set as 0, this function will not be available. |
B1 | Running Speed of Drying Pump | 0-100 |
|
B2 | Drying Delay Time | 0-100 | RINSE terminal on the motherboard shall be connected for operation |
B3 | Working Time of Drying Pump | 0-100 |
Fixed Time Mode (P0)
No. | Function | Value Scope | Remarks |
C1 | Running Speed of Washing Pump | 30-100 |
|
C2 | Delay Time of Washing Pump for Liquid Filling Preparation | 0-100 | DET terminal on the motherboard shall be connected for operation, and the liquid filling may be recycled. |
C3 | Running Time of Washing Pump for Liquid Filling Preparation | 0-100 |
C4 | Delay Time of Washing Pump for Liquid Filling Every Time | 0-100 | RINSE terminal on the motherboard shall be connected for operation, and the liquid filling may be recycled. |
C5 | Running Time of Washing Pump for Liquid Filling Every Time | 0-100 |
B1 | Running Speed of Drying Pump | 0-100 |
|
B2 | Delay Time of Drying Pump for Liquid Filling Every Time | 0-100 | RINSE terminal on the motherboard shall be connected for operation, and it is recyclable. |
B3 | Running Time of Drying Pump for Liquid Filling Every Time | 0-100 |
When the delay time is 0, it will only run for the time set for running as the power is on (no matter how long the power is on).
When both the delay time and running time are 0, the corresponding working pump will continue running as its power is on and will stop running as its power is off.
When both the delay time and running time are not 0, it will run for the delay time and then the running time as the power is on.